After finishing profitable solar panel installations with roof recovers at vegetation in Peachtree City, Georgia, and Adelanto, California, McElroy Metal not too long ago accomplished a third solar conversion with its plant in Clinton, Illinois.

Inovateus Solar put in 1,116 Hanwha Q-Plus L-G42 350W panels on the power in Clinton. The system is rated at 390.6 kW DC, has 5 inverters and is designed for an annual output of 829,289 kWh.

“We’re very excited about the addition of solar panels to a third manufacturing facility in conjunction with the roof recover,” says Ken Gieseke, Vice President – Marketing at McElroy Metal. “Once we did the math, calculated the return on the investment, it simply made sense to install the solar panels. McElroy Metal remains dedicated to being an advocate for solar energy.”

The authentic R-panel metallic roofing on the plant, constructed within the 1970s, was recovered by McElroy Metal’s 238T symmetrical standing seam roofing. Solar panels had been hooked up to the brand new roofing utilizing S-5! clamps.

“McElroy Metal has been a respected and premier metal roof and component manufacturer for three generations,” says Rob Haddock, founder and CEO of S-5!. “Just like S-5!, they got there by setting the highest standards of quality and integrity for themselves and for their vendors. As both companies are leaders in the metal construction industry, we have had the privilege of working alongside McElroy in many venues, industry trade groups and supply relationships now spanning almost 40 years. Not only are they a valued S-5! customer and distribution partner, but close friends, industry advocates, allies and activists. Two premier brands, McElroy and S-5!, have both raised the bar in making metal roofs better, and together again, with the addition of solar power on their third S-5! solarized project. I am sure we both look forward to the next one.”

Quite a lot of S-5! merchandise had been utilized in attaching the solar panels to the standing seam roofing, together with 1,800 S-5-T clamps, particularly designed to suit profiles with a “T” formed seam configuration, and 850 RibBracket II clamps, that are made for attaching to trapezoidal roof profiles.

In addition, 2,050 MidGrab clamps and 410 EdgeGrab clamps from the S-5! PVKIT 2.0 had been additionally used. The PVKIT 2.0 is comprised of pre-assembled parts to avoid wasting money and time that require using just one instrument for set up. All elements are fabricated from non-corrosive aluminum and stainless-steel and set up with the module to cut back structure time.

McElroy’s 238T symmetrical standing seam system doesn’t have female and male seams, however is comprised of panels with matching left and proper seams. The panels are joined with a mechanically seamed cap. The panels are non-directional and might be put in left to proper, proper to left and even middle to proper or left. In addition to set up advantages, symmetrical panels supply straightforward particular person panel elimination and alternative for straightforward plenum entry. Panels may even be re-installed, requiring solely the acquisition and set up of a brand new cap.

The 238T metallic roofing panels had been roll shaped on website, run immediately on to the roof and put in by Prairieland Roofing of Arthur, Illinois.

News merchandise from McElroy

Source link

Load More By emteams77
Load More In Solar
Comments are closed.

Check Also

How I Built Our DIY Hoop House (Greenhouse), pt. 1: Framing

The framing for our new hoop house is now full, and later this month when temperatures fal…